Product Details:
Packaging Type | Bottle |
Color | Natural |
Packaging Size | Standard |
Net Content | N/a |
Features | N/a |
Boiling Point | N/a |
Product Details:
Brand | Loctite |
Packaging Size | 20 ml |
Packaging Type | Tube |
Technical data
Fixture time | 5 – 20 sec. |
Colour | Colourless transparent |
Suited for plastics | |
Suited for polyolefines in combination with Primer LOCTITE 770 or LOCTITE 7239 | |
Suited for rubbers | |
Suited for metals | |
Viscosity in mPa·s | 30 |
Service temperature range | -40 °C to +80 °C |
Product Details:
Pack Type | 10nos Box |
Brand | Loctite |
Model Number | 3506 |
Packaging Size | 50ml Tube,250ml Tube |
Loctite® 243 is a general purpose threadlocker of medium bond strength.
- Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
- Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
- Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
- Permits disassembly with hand tools for servicing
- P1 NSF Reg. No.: 123000
Loctite® 243 is a general purpose threadlocker of medium bond strength. This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting
Technical DataColour | Blue |
Max. thread size | Up to M36 |
Service temperature range | -55 to +180°C |
Breakaway torque | 26 Nm |
Approvals | P1 NSF Reg. No.: 123000 |
Fixture time steel | 10 min |
Fixture time brass | 5 min |
Fixture time stainless steel | 10 min |
Thixotropy | Yes |
Additional Information:
Loctite® 242 Medium strength, medium viscosity, general purpose threadlocker, Breakaway torque 11.5Nm
Technical data:Maximum thread size | Up to M36 |
Strength | Medium |
Breakaway torque M10 bolts | 11.5Nm |
Fixture time steel | 5 min. |
Fixture time brass | 15 min. |
Fixture time stainless steel | 20 min. |
Service temperature range | -55°C - +150°C |
Pack sizes | 50ml, 250ml |
Feature | Benefit |
Protects threads | Prevents rusting of threads |
Medium strength | Can be removed with hand tools |
Locks threads | Prevents loosening of metal fasteners caused by vibrations |
Additional Information:
Display Easy Selction Threadlocker Infograph
Open easy threadlocker selection graphic .
When to use a Primer?
Use a primer when both surfaces are inactive. It is necessary to apply primer on one surface, in most cases unless gaps are excessive.
Plated parts, pure aluminium, black oxide, plastics, galvanised steel, stainless steel, magnetite steel also come under inactive surfaces.
Additional Information:
LOCTITE 270 is a high-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration.
- High-strength general threadlocker for maximum efficacyTechnical Data
Colour | Green |
Max. thread size | Up to M20 |
Service temperature range | -55 to +180°C |
Breakaway torque | 33 Nm |
Approvals | P1 NSF Reg. No.123006 |
Fixture time steel | 10 min |
Fixture time brass | 10 min |
Fixture time stainless steel | 30 min |
Thixotropy | No |
Technical Data
Maximum thread size | Up to M20 |
Strength | High |
Breakaway torque M10 bolts | 38Nm |
Fixture time steel | 10 min. |
Fixture time brass | 4 min. |
Fixture time stainless steel | 25 min. |
Service temperature range | -55°C - +150°C |
Pack sizes | 10ml, 50ml, 250ml |
Additional Information:
Additional Information:
Product Details:
Brand | Loctite |
Loctite® 401™ Prism® instant adhesives apply for acidic surfaces such as chromate or galvanised surfaces.
- Resists temperatures up to 120 °C
- For rapid bonding of plastics, rubbers and metal
- For porous substrates such as wood, paper, leather, cork and fabric
Technical Data
Fixture time | 3 – 10 sec. |
Colour | Colourless Transparent |
Suited for plastics | |
Suited for polyolefines in combination with Primer Loctite 770 or Loctite 7239 | |
Suited for rubbers | |
Suited for metals | |
Well suited for porous and/or acidic surfaces | |
Viscosity in mPa•s | 100 |
Service temperature range | -40 °C to +120 °C |
Pack sizes | 3g, 20g, 50g, 500g |
Additional Information:
Loctite 406 Prism Instant Adhesive is designed for bonding of plastics and elastomeric materials where very fast fixturing is required.
- Very fast fixture speed
- Particularly suited for bonding a wide variety of materials, such as metals, plastics, elastomers, paper, leather, cork, fabric, wood, chromate plated parts, etc.
- Fast cure even in challenging environments
Technical Data
Fixture time | 2 - 10 sec. |
Colour | Colourless transparent |
Well suited for plastics | |
Well suited for polyolefines in combination with Primer Loctite 770 or Loctite 7239 | |
Well suited for rubbers | |
Suited for metals | |
Viscosity in mPa•s | 20 |
Service temperature range | -40 °C to +120 °C |
Pack sizes | 20g, 50g, 500g |
Additional Information:
Technical data
Fixture time | 5 – 20 sec. |
Colour | Colourless transparent |
Viscosity in mPa·s | 30 |
Service temperature range | -40 °C to +100 °C |
Pack sizes | 20g, 500g |
Additional Information:
Product Details:
Brand | Loctite |
Packaging Size | 20 ml |
Packaging Type | Tube |
Technical data
Fixture time | 20 – 40 sec. |
Colour | Colourless transparent |
Suited for plastics | |
Suited for polyolefines in combination with Primer LOCTITE 770 or LOCTITE 7239 | |
Suited for rubbers | |
Well suited for metals | |
Viscosity in mPa·s | 1.200 |
Service temperature range | -40 °C to +80 °C |
Pack sizes | 20g, 50g, 500g |
Product Details:
Brand | Loctite |
Packaging Size | 20 ml |
Packaging Type | Tube |
Technical data
Fixture time | 5 – 20 sec. |
Colour | Colourless transparent |
Well suited for plastics | |
Suited for polyolefines in combination with Primer LOCTITE 770 or LOCTITE 7239 | |
Suited for rubbers | |
Suited for metals | |
Viscosity in mPa·s | 2 |
Service temperature range | -40 °C to +80 °C |
Product Details:
Brand | Loctite |
Packaging Type | Tube |
Product Details:
Brand | Loctite |
Packaging Size | 20 ml |
Packaging Type | Tube |
LOCTITE 480 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength.
- For applications where shock resistance is required or shock or peel loads are present
- Ideal for bonding metal to metal, to rubber or magnets
Good resistance in humid environments. Fast curing.
LOCTITE 480 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. It is a rubber-reinforced adhesive offering increased flexibility and peel strength along with enhanced shock resistance. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and rubbers. The product exhibits good resistance in humid environments.
Technical Data
Colour | Black |
Fixture time | 20-50 sec. |
Service temperature range | -40 to + 100°C |
Max. gap size | < 0,15 mm |
Description | Thoughend, black, slow |
LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.
- Ideal for fine threads as used in hydraulic, pneumatic & general fittings
- Suitable for metal threads only.
The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.
Technical Data
Colour | Brown |
Max. thread size | M26 / R3/4'' |
Service temperature range | -55 to +150°C |
Breakaway torque | 15 Nm |
Approvals | DVGW, WRAS 123006 |
Disassembly strength | Medium |
Thixotropy | No |
Additional Information:
Properties of Loctite Thread sealant
Additional Information:
Additional Information:
Additional Information:
Product Details:
Brand | Loctite |
Packaging Size | 50 ml |
Packaging Type | Tube |
LOCTITE 572 for metal, slow cure thread sealant
- Suitable for coarse metal threads
- Ideal where slow cure is required for adjusting the alignment of fittings
Technical Data
Maximum pipe size | 3" |
Disassembly strength | Medium |
Service temperature range | -50°C - +150°C |
Breakaway torque | 7 Nm |
Pack sizes | 50ml, 250ml |
Product Details:
Brand | Loctite |
Packaging Size | 50 ml |
Packaging Type | Tube |
LOCTITE 574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections. The nature of LOCTITE 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.
Technical Data
Colour | Orange |
Max. gap size | max. 0,25 mm |
Service temperature range | -55 to +150°C |
Tensile shear strength in N / mm² | 8,5 |
Substrate to be sealed | Metals |
Fixture time steel | 15 min. |
Fixture time aluminium | 45 min. |
LOCTITE 603 is a high-strength retaining compound.
- High-strength retaining compound
- Especially suitable for sintered bearings
- High oil tolerance
Designed for the bonding of cylindrical fitting parts, especially for sintered bearings and also where consistently clean surfaces cannot be assured. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It has a high oil tolerance.
Technical Data
Colour | Green |
Max. gap size | 0,1 mm |
Service temperature range | -55 to +150°C |
Tensile shear strength in N / mm² | > 22,5 |
Approvals | P1 NSF, WRAS |
Fixture time steel | 8 min. |
Thixotropy | No |
Technical Data
Typical applications | Augment press fits |
Viscosity | 125cP |
Cure Time | Fixture - 10 minutes Full - 24 hours |
Max gap fill | 0.12mm |
Temperature resistance | 150°C |
Shear strength | 15.8 /mm2 |
LOCTITE 638 is designed for the bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.25 mm.
- High temperature resistance
- Tolerates minor contaminants, including industrial oils
- High strength on all metals, including passive substrates (e.g. stainless steel)
The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It not only works on active metals but also on passive substrates, exhibiting robust cure performance. The product offers high-temperature performance and good oil tolerance, and tolerates minor surface contaminants.
Technical Data
Colour | Green |
Max. gap size | 0,25 mm |
Service temperature range | -55 to +180°C |
Tensile shear strength in N / mm² | > 25 |
Approvals | P1 NSF Reg. No.: 123010 |
DVGW Approval (EN 751-1) | NG-5146AR0619 |
WRAS Approval (BS 6920) | 511518 |
Fixture time steel | 4 min. |
Thixotropy | No |
LOCTITE 641 is designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for servicing operations.
- Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings
Technical Data
Colour | Yellow |
Max. gap size | 0,1 mm |
Service temperature range | -55 to +150°C |
Tensile shear strength in N / mm² | > 6,5 |
Fixture time steel | 25 min. |
Thixotropy | No |
LOCTITE 648 is designed for the bonding of cylindrical fitting parts.
- High temperature resistance
- Proven to be tolerant of minor contamination due to industrial oils
- High strength on all metals, including passive substrates (e.g. stainless steel)
The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It exhibits a robust curing performance. The product also works on passive substrates and offers high-temperature performance and good oil tolerance.
Technical Data
Colour | Green |
Max. gap size | 0,15 mm |
Service temperature range | -55 to +180°C |
Tensile shear strength in N / mm² | > 25 |
Approvals P1 NSF Reg. No. | 148350 |
DVGW Approval (EN 751-1) | NG 5146C00236 |
WRAS Approval (BS 6920) | 808532 |
Fixture time steel | 3 min. |
Thixotropy | No |
Technical Data
Typical applications | Worn parts |
Viscosity | 250,000/1,5000,000cP |
Cure Time | Fixture - 20 minutes Full - 24 hours |
Max gap fill | 0.5mm |
Temperature resistance | 150°C |
Shear strength | 23N/??? |
Additional Information:
Product Details:
Application Industry | Jointing |
Surface Of Application | Metal |
Product Details:
Brand | Loctite |
Packaging Type | Tube |
Loctite® 595 Body Repair - Seam Sealing - 1K silicone, skin over time 10 to 15 min.
- Bonding, sealing and protecting of components subjected to shock, constant vibration, twisting, flexing, thermal expansion and contraction
Applications
- Suitable for glass, metal, ceramics, composites and most plastics
Loctite® 595 Body Repair - Seam Sealing - 1K silicone, skin over time 10 to 15 min.
Technical Data
Product base | 1K acetoxy silicone |
Colour | Clear |
Odour | Acetic |
Service temperature range | -55 °C +250 °C |
Pack sizes | 40ml blister card, 100ml tube |
Additional Information:
Product Details:
Packaging Type | Spray Bottle |
Product Details:
Brand | Loctite |
Packaging Size | 50 ml |
Packaging Type | Tube |
Application Industry | Automotive |
Technical Data
Maximum thread size | Up to M80 |
Strength | High |
Breakaway torque M10 bolts | 23Nm |
Fixture time steel | 40 min. |
Service temperature range | -55°C - +200°C |
Pack sizes | 50ml, 250ml |
Gasketing is a sealant between two flanges assembled with screws. The sealant completely fills the space between the flange surfaces, thereby preventing the escape of gaseous or fluid materials in composite machine parts or pipe connections.
The sealant for gasketing can be used with many different types of materials including various metals, wood, plastic, rubber, ceramics, glass, and even concrete. The type of sealant selected for a specific application depends on the material to be sealed, environmental conditions, temperature, and operating pressures in the system.
Product Details:
Brand | Loctite |
Packaging Size | 50 ml |
Packaging Type | Tube |
Loctite® 577™ Thread Sealant is a medium strength, general purpose sealant for use on coarse- threaded components. Particularly suitable for use on stainless steel without the need for surface activation. And it also can be uesd at low temperatures requiring fast cure.
Technical Data
Maximum pipe size | 3" |
Disassembly strength | Medium |
Service temperature range | -50°C - +150°C |
Breakaway torque | 11 Nm |
Pack sizes | 50ml, 250ml |
Product Details:
Brand | Loctite |
Packaging Type | Tube |
Resistance Capabilities
Advantages
Your benefits
Technical Data
Loctite® 5920 for flexible flanges, machined or casted surfaces, high temperature resistant
Technical Data
Colour | Copper |
Service temperature range | -60°C - +350°C |
Tensile shear strength | 1.4N/mm² |
Max. gap | 1mm |
Skin over time | 40 min. |
Cure through volume in 24 h | 2.5 mm |
Strength | Low |
Cure method | Moisture (Silicone) |
Pack sizes | 80ml tube, 300ml cartridge |
Additional Information:
LOCTITE 55 is designed for the locking and sealing of metal and plastic pipes and fittings.
- General purpose, threaded pipe and fitting sealant
- Non-curing, immediate, full-pressure seal
- For a quick, easy and reliable seal
The product has approval for gas and potable water and is certified to NSF/ANSI, Standard 61.
Technical Data
Colour | White |
Max. thread size | R4'' |
Service temperature range | -55 to +130°C |
Breakaway torque | n.a. |
Approvals | DVGW, KTW, NSF |
Disassembly strength | n.a. |
Thixotropy | No |