Champion Gasketing Products

Description:
Champion Spiral Wound Gaskets are composed of a metallic continuous strip with a special shaped profile, coupled with a continuous filling strip (Asbestos, PTFE, Graphite etc.) evenly wound in concentric spiral under constant stress. The Spiral Wound Gaskets are reinforced on the inner and outer diameter by winding of several electrically welded metal. The main property of Spiral Wound Gasket, owing to elastic action of the special metallic strip profile, is that of offering a perfect sealing under fluctuating pressure and temperature conditions & maintaining tight elastic recovering. This elasticity can be modified by a proper selection of components. A proper selection of materials (both metal and fillers) allows the spiral gasket to accommodate the most varied operating conditions. Spiral Gaskets are made as per ASME B16.20 to suit ASME B16.5 flanges and as per "A" Series and "B" Series to suit ASME B16.47 flanges. We also make spiral as per DIN 2632-2638, IS Standards, etc.

Description:
Champion Spiral Wound Gaskets are composed of a metallic continuous strip with a special shaped profile, coupled with a continuous filling strip (Asbestos, PTFE, Graphite etc.) evenly wound in concentric spiral under constant stress. The Spiral Wound Gaskets are reinforced on the inner and outer diameter by winding of several electrically welded metal. The main property of Spiral Wound Gasket, owing to elastic action of the special metallic strip profile, is that of offering a perfect sealing under fluctuating pressure and temperature conditions & maintaining tight elastic recovering. This elasticity can be modified by a proper selection of components. A proper selection of materials (both metal and fillers) allows the spiral gasket to accommodate the most varied operating conditions. Spiral Gaskets are made as per ASME B16.20 to suit ASME B16.5 flanges and as per "A" Series and "B" Series to suit ASME B16.47 flanges. We also make spiral as per DIN 2632-2638, IS Standards, etc.

Product DescriptionDescription:
A cost effective product manufactured from ecofriendly natural cellulosic fibres bonded with suitable mix of elastomers.

Available Colour:
Red and Green


Service Conditions:
General purpose gasketing material suitable for use with Oils, Solvents, Gases, Water, L.P.Steam and most dilute acids and alkalies (Low service conditions).

Description:
Champion Spiral Wound Gaskets are composed of a metallic continuous strip with a special shaped profile, coupled with a continuous filling strip (Asbestos, PTFE, Graphite etc.) evenly wound in concentric spiral under constant stress. The Spiral Wound Gaskets are reinforced on the inner and outer diameter by winding of several electrically welded metal. The main property of Spiral Wound Gasket, owing to elastic action of the special metallic strip profile, is that of offering a perfect sealing under fluctuating pressure and temperature conditions & maintaining tight elastic recovering. This elasticity can be modified by a proper selection of components. A proper selection of materials (both metal and fillers) allows the spiral gasket to accommodate the most varied operating conditions. Spiral Gaskets are made as per ASME B16.20 to suit ASME B16.5 flanges and as per "A" Series and "B" Series to suit ASME B16.47 flanges. We also make spiral as per DIN 2632-2638, IS Standards, etc.

Description:
We are manufacturing wide range of Compressed Gaskets, i.e. Pre-cut Gastkets out of CAF / NON ABSESTOS, PTFE, GRAPHITE etc.. The Gaskets are Manufactured as per ASME B16.21 standards suitable for flanges as per ASME B16.5 amd ASME B16.47 Series A & B.
We also manufacture gaskets as per IS, BS, DIN Standards, and non-standard Gaskets as per customer's specifications and drawings

Description:
This is a high grade jointing sheet manufactured from superior quality asbestos bonded with special grade rubber and chemicals. This is a high tech CAF jointing sheet specially designed for extreme conditions. This is developed only in metallic variety with special metallic wire net to prevent galvanic corrosion and special grade of graphite is used on the surface which acts as anti-release agent. This gasket is resistant not only to high temperature but also to extreme pressure surge which is a common factor in main steam line. This CAF jointing is suitable for super heated and saturated steam, hydrocarbon, sulphurous compounds phenols, refrigerants, alkalis etc. 

 

 

Description:
Champion Spiral Wound Gaskets are composed of a metallic continuous strip with a special shaped profile, coupled with a continuous filling strip (Asbestos, PTFE, Graphite etc.) evenly wound in concentric spiral under constant stress. The Spiral Wound Gaskets are reinforced on the inner and outer diameter by winding of several electrically welded metal. The main property of Spiral Wound Gasket, owing to elastic action of the special metallic strip profile, is that of offering a perfect sealing under fluctuating pressure and temperature conditions & maintaining tight elastic recovering. This elasticity can be modified by a proper selection of components. A proper selection of materials (both metal and fillers) allows the spiral gasket to accommodate the most varied operating conditions. Spiral Gaskets are made as per ASME B16.20 to suit ASME B16.5 flanges and as per "A" Series and "B" Series to suit ASME B16.47 flanges. We also make spiral as per DIN 2632-2638, IS Standards, etc.

Notes :
As the company's products are used for a multiplicity of purposes and as the company has no control over the method of their application or use, the company excludes all conditions or warranties, expressed or implied by statue or otherwise, as to their products and / or their fitness for any particular purpose. Any technical co-operation between the company and the customer is given for the customer's assistance only and without liability on the part of the company.

Description:
Champion Spiral Wound Gaskets are composed of a metallic continuous strip with a special shaped profile, coupled with a continuous filling strip (Asbestos, PTFE, Graphite etc.) evenly wound in concentric spiral under constant stress. The Spiral Wound Gaskets are reinforced on the inner and outer diameter by winding of several electrically welded metal. The main property of Spiral Wound Gasket, owing to elastic action of the special metallic strip profile, is that of offering a perfect sealing under fluctuating pressure and temperature conditions & maintaining tight elastic recovering. This elasticity can be modified by a proper selection of components. A proper selection of materials (both metal and fillers) allows the spiral gasket to accommodate the most varied operating conditions. Spiral Gaskets are made as per ASME B16.20 to suit ASME B16.5 flanges and as per "A" Series and "B" Series to suit ASME B16.47 flanges. We also make spiral as per DIN 2632-2638, IS Standards, etc.

Notes :
As the company's products are used for a multiplicity of purposes and as the company has no control over the method of their application or use, the company excludes all conditions or warranties, expressed or implied by statue or otherwise, as to their products and / or their fitness for any particular purpose. Any technical co-operation between the company and the customer is given for the customer's assistance only and without liability on the part of the company.

Description:
Champion Spiral Wound Gaskets are composed of a metallic continuous strip with a special shaped profile, coupled with a continuous filling strip (Asbestos, PTFE, Graphite etc.) evenly wound in concentric spiral under constant stress. The Spiral Wound Gaskets are reinforced on the inner and outer diameter by winding of several electrically welded metal. The main property of Spiral Wound Gasket, owing to elastic action of the special metallic strip profile, is that of offering a perfect sealing under fluctuating pressure and temperature conditions & maintaining tight elastic recovering. This elasticity can be modified by a proper selection of components. A proper selection of materials (both metal and fillers) allows the spiral gasket to accommodate the most varied operating conditions. Spiral Gaskets are made as per ASME B16.20 to suit ASME B16.5 flanges and as per "A" Series and "B" Series to suit ASME B16.47 flanges. We also make spiral as per DIN 2632-2638, IS Standards, etc.

Notes :
As the company's products are used for a multiplicity of purposes and as the company has no control over the method of their application or use, the company excludes all conditions or warranties, expressed or implied by statue or otherwise, as to their products and / or their fitness for any particular purpose. Any technical co-operation between the company and the customer is given for the customer's assistance only and without liability on the part of the company.

Description:
Champion Spiral Wound Gaskets are composed of a metallic continuous strip with a special shaped profile, coupled with a continuous filling strip (Asbestos, PTFE, Graphite etc.) evenly wound in concentric spiral under constant stress. The Spiral Wound Gaskets are reinforced on the inner and outer diameter by winding of several electrically welded metal. The main property of Spiral Wound Gasket, owing to elastic action of the special metallic strip profile, is that of offering a perfect sealing under fluctuating pressure and temperature conditions & maintaining tight elastic recovering. This elasticity can be modified by a proper selection of components. A proper selection of materials (both metal and fillers) allows the spiral gasket to accommodate the most varied operating conditions. Spiral Gaskets are made as per ASME B16.20 to suit ASME B16.5 flanges and as per "A" Series and "B" Series to suit ASME B16.47 flanges. We also make spiral as per DIN 2632-2638, IS Standards, etc.

Notes :
As the company's products are used for a multiplicity of purposes and as the company has no control over the method of their application or use, the company excludes all conditions or warranties, expressed or implied by statue or otherwise, as to their products and / or their fitness for any particular purpose. Any technical co-operation between the company and the customer is given for the customer's assistance only and without liability on the part of the company.

Description:
Champion Spiral Wound Gaskets are composed of a metallic continuous strip with a special shaped profile, coupled with a continuous filling strip (Asbestos, PTFE, Graphite etc.) evenly wound in concentric spiral under constant stress. The Spiral Wound Gaskets are reinforced on the inner and outer diameter by winding of several electrically welded metal. The main property of Spiral Wound Gasket, owing to elastic action of the special metallic strip profile, is that of offering a perfect sealing under fluctuating pressure and temperature conditions & maintaining tight elastic recovering. This elasticity can be modified by a proper selection of components. A proper selection of materials (both metal and fillers) allows the spiral gasket to accommodate the most varied operating conditions. Spiral Gaskets are made as per ASME B16.20 to suit ASME B16.5 flanges and as per "A" Series and "B" Series to suit ASME B16.47 flanges. We also make spiral as per DIN 2632-2638, IS Standards, etc.

Notes :
As the company's products are used for a multiplicity of purposes and as the company has no control over the method of their application or use, the company excludes all conditions or warranties, expressed or implied by statue or otherwise, as to their products and / or their fitness for any particular purpose. Any technical co-operation between the company and the customer is given for the customer's assistance only and without liability on the part of the company.

Description:
A Premium grade jointing sheet based on special synthetic Aramid fibres bonded with nitrile elastomer.

Service Conditions:A universal grade suitable for many industrial sealing applications. Media : Hot oils, fuels, Hydrocarbons and refrigerants. (High Service Conditions)

Description:
A top quality acid resistant compressed synthetic Aramid fibre jointing sheet bonded with special binders

Service Conditions:Acid resistant grade. Recommended for use against hot, Concentrated organic/inorganic/mineral acids.

Description: 
A high quality jointing sheet based on synthetic Aramid fibres bonded with NBR elastomer.


Service Conditions:
Suitable for use in applications involving hydrocarbons such as oils and solvents, steam, gases, glycols and aqueous solutions. (Medium Service Conditions).

A superior performance compressed jointing sheet incorporating a blend of special heat resisting Aramid fibres with a high quality nitrile elastomer binder.

Service Conditions:Suitable for use with Oils, Solvents, Gases, Steam, Dilute Acids and alkalies. (High Service Conditions).

Description:
A superior performance compressed jointing sheet incorporating a blend of special heat resisting Aramid fibres with a high quality nitrile elastomer binder.

Service Conditions:Suitable for use with Oils, Solvents, Gases, Steam, Dilute Acids and alkalies. (High Service Conditions). 

 

 

Description:
A compressed synthetic Aramid fibre jointing sheet bonded with elastomers to create a matrix of stability.

Service Conditions:
Suitable for light industrial applications. Media : Water, Gases, Medium pressure Steam, Dilute Acids/Alkalies (Medium Service Conditions). 

 

 

Description:
A high grade Asbestos Fibre Jointing bonded with a sophisticated compound, this specialised jointing withstands the most exacting demands of oil and Petrochemicals plants, solvents refrigerator, oil etc. Used in pipe lines and apparatus of the petrochemical fields, petroleum distillates, oil and petroleum refining industries. It is also recommended in industrial processes with high contents of aromatic substances, sulphurous compounds, chloric hydrocarbons, phenols, refrigerants, etc. Use of CHAMPION oil jointing sheet assures safety and economy even on critical working conditions. The jointing gives satisfactory services against steam also.

Description:
This is a superior grade jointing sheet manufactured from high quality chrysotile asbestos bonded with special grade NBR binder. This is specially designed CAF jointing sheet for application over an unlimited range of critical application. This hitech CAF jointing is suitable for hydrocarbon, fuel oil, solvent, petroleum distillates, alcohol, aromatic substances, phenols, refrigerants, alkalis etc

Description:
Compressed Asbestos Fibre Jointing is a consistently uniform and resilent product. A price worthy quality of dependable performance, plus adaptibility to many sealing requirements make this 'STEAM' JOINTING the choice sheet packing of Plant Engineers and Maintenance Man. CHAMPION STYLE 20 jointing nd developed for general pupose appications and this quality is applicable to a wide range of duties with less severe working conditions of temperature and pressure

Description:
Manufactured from excellent quality of Chrysotile Asbestos Fibre and raw materials, the blend being intimately mixed with heat resisting rubber compounds under special process, to ensure maximum stability against high pressure and temperatures. Though primarily a super heated steam Jointing it is also recommended against saturated Steam, Oxygen, petroleum distillates, oils and fats, fuels, internal combustion engines, hydrocarbons, alcohols, solvents, lyes, etc. It is popularly used in MARINE ENGINES, electricity generating sets etc.

Available Colours:Yellow/grey or Graphited 

 

 

Description:
A Compressed fibre jointing with wire gauze insertion supplied with Graphite Finish. Used for general purpose application where conditions of temeperature and pressure are not too serve. 

 

 

Description:
This is a specialised Asbestos Fibre Jointing Sheet which is intimately bonded with Acid resisting compound, to withstand the corrosive action of acids and chemicals. Recommended for use against hot concentrated organic, Inorganic and mineral acids including hydrochloric, sulphuric (oleum) and nitric acids, under service conditions of temperature and pressures commonly encountered in Chemical Industries.

Description:
Champion Spiral Wound Gaskets are composed of a metallic continuous strip with a special shaped profile, coupled with a continuous filling strip (Asbestos, PTFE, Graphite etc.) evenly wound in concentric spiral under constant stress. The Spiral Wound Gaskets are reinforced on the inner and outer diameter by winding of several electrically welded metal. The main property of Spiral Wound Gasket, owing to elastic action of the special metallic strip profile, is that of offering a perfect sealing under fluctuating pressure and temperature conditions & maintaining tight elastic recovering. This elasticity can be modified by a proper selection of components. A proper selection of materials (both metal and fillers) allows the spiral gasket to accommodate the most varied operating conditions. Spiral Gaskets are made as per ASME B16.20 to suit ASME B16.5 flanges and as per "A" Series and "B" Series to suit ASME B16.47 flanges. We also make spiral as per DIN 2632-2638, IS Standards, etc.

Notes :
As the company's products are used for a multiplicity of purposes and as the company has no control over the method of their application or use, the company excludes all conditions or warranties, expressed or implied by statue or otherwise, as to their products and / or their fitness for any particular purpose. Any technical co-operation between the company and the customer is given for the customer's assistance only and without liability on the part of the company.

Description:
A Compressed Asbestos Fibre Jointing Graphited embedded with a strong reinforcement of steel wire gauze, THE SUPER METALLIC gasket sheet is superior in performance over other forms of Jointing Sheets where severe physical conditions of High Pressure and temperature have to be resisted. It is effectively used under rapidly changing operating conditions of pressure, where vibrations are experienced, where the flange of the gasket joint is narrow, in diesel exhaust manifold, cylinder head gaskets, internal combustion engines andAir Compressors.

Description:
Manufactured from selected Asbestos Fibre and bonded with high grade binder compound, this product has a wide range of applications in the industrial field. Recommended against steam, neutral non flammable gases, dyes alkalies, fats, oils, alcohols, motor fuels and such other engineering service conditions which do not warrant the use of as High Grade material such as CHAMPION Style 54 SUPER.


Available Colour:
Brown/grey or Graphited Finish Metallic and Non-metallic 

 

 

Description:
Manufactured from selected quality of Asbestos Fibre and vulcanized with special rubber compound to meet with the exacting requirements of modern industry. Used for application against dry and wet steam water, gases, alkalies, oil at normal tempertaures, chemicals fuels etc. and general engineering. CHAMPION Style 39 can also be provided with wire gauze insertion in graphited finish.

Colour:Red/grey or Graphited